Feed aggregator

Resolution: 2048x2048

Maps included:

- Color

- Normal

- AO

- Height

- Mask

This pack contains:

10 seamless textures

Complete track geometry:

Triangles: 1 700 000

Vertices: 1 280 000

47 Materials

71 Textures (including specular and normal maps ) - sizes from 512x512px to 8192x8192px

UV mapping: mixed

Render pipeline - Package uses Built-in RP, but can be switched to URP/HDRP

This is a fictional race circuit, based on location in Mojave desert. Visually this track looks like old, abandoned place from 1970s. It's a place where you take your vintage (or modern) muscle car on Sunday, and do some practice laps while enjoying sunsets of California desert. There are almost no safety measures around this track, it's just you, your car, your skills and sand beyond the edge of tarmac. Old concrete grand stands remind of better times 50 years ago, but an endless field of solar panels next to track takes you back to present day.

Total landscape of area is roughly 26x27 kilometers, track distance is 4.3 kilometers. Average track width is 13 meters.

Basic workflow description:

You can assemble a complete race track within few minutes by dragging and dropping a set of prefabs into your scene. Those are:

* Terrain (road, grass, concrete, curbs, lines etc.)

* Vehicles

* Colliders

* Objects - distance markers, cars, banners

* Trees

* Walls and barriers

* Buildings

* Seats

* Pit trolleys

* Tyre blocks

* Flag panels. 

You can replace these with your scripted prefabs, that change LED panel color depending on race state (Green, Yellow, Finish, Safety car etc.). I made a mesh for each state panel, so you can use your own race manager system to control them.

After placing the pre-built track components you can easily turn off some of them if you want to customize or optimize your scene. I have made the grass, road, curbs and concrete as separate meshes. This way you can add different sound effects when car is driving over them. You can use your scripts and physics materials to make the grass mesh slippery, sand patches to slow the car down etc.

Additionally, you can place individual objects to further change the appearance of the environment.

Here is the list of all available 3d objects you get with the track:

* Spectator seats

* Ambulance and crane hook, 3 trucks (lorries), 3 motorhomes (RVs)

* 5 grass types and 2 bush types

* Tyre stands and portable banner for pitlane

* Distance markers and cones

* Pit trolleys for re-fueling cars

* Marshal tower

* Radio tower

* Safety wall blocks with/without fence, with ads, and just fence

* Tyre wall, tyre stack and a single tyre

* Banners, and banner frame, L shaped banner frame

* Start light cluster

* Pitwall desks with seats and PC screens

* Concrete slabs to cover off roads

* Podium steps

* Mechanic tent

* LED flag panels (you need to create script to turn on/off the right colors for green, yellow, red etc. flag

scenarios)

What are the benefits of using this asset?

1. Ease of use. You don't have to spend hours sticking together straights and corners to make a race track. All you have to do is drag prefabs into an empty scene, and you have a realistic looking track with road, grass, mountains, trees, garages, walls and everything else you might need. All what's left is to place your vehicle prefab and start testing.

2. Safety. If you have a scene with track built from separate elements, there is always possibility to corrupt the scene file, or run into compability issues after upgrading engine. If you lose your scene file, all your hard work is lost. With this pre-built asset, you will always have complete track from a handful of prefabs thrown into scene.

3. Separate objects. If you don't like the trackside object placement of default track, it's easy to turn off the elements, and place trees, walls, garages and everything else as you see fit.

More tracks are coming!

I will build more tracks that use same artstyle and props, and add more objects. If you are looking for cartoon style race tracks, please check out my seller profile, I have already made 30 cartoon style circuits.

For any questions about this asset send me an email to retrovalorem@gmail.com.

• 202 game-ready meshes
• 10 modular buildings for flexible layouts
• PBR 4K textures (Base, Normal, Mask maps)
• Polygon count: 4 – 133,581
• LOD levels: Up to 3 per mesh
• UV Mapping: Yes (non-overlapping secondary UVs)
• Demo Scene: Included (NYC street showcase)
• No rigging or animation

Props Included:
AC units, HVAC, air vents, balconies, barricades, fences, big billboards, cardboard boxes, chairs, dumpsters, fire hydrants, mailboxes, metal waste bins, roads, shop awnings, shop boards, solar panels, stairs, street signs, tables, traffic barrels, signals, tree guards, umbrellas, and more.

Capture the essence of New York with the Urban City Modular Environment Pack Vol. 2, a powerful collection of 202 game-ready 3D models designed for building vibrant, cinematic cityscapes.

Inspired by the iconic NYC architecture and streetscapes, this pack delivers the realistic, vertical energy of superhero-style worlds and bustling urban environments.

Featuring 10 fully modular buildings, you can create flexible street layouts, rooftops, and city blocks with ease. Every asset is crafted with PBR 4K textures (Base, Normal, Mask maps), detailed UV mapping, and optimized with up to 3 LOD levels for high visual fidelity and performance.

The included demo scene showcases a lively New York-inspired street with storefronts, signage, and environmental props that bring the city to life. 

From traffic lights, billboards, and barricades to dumpsters, air vents, and umbrellas, this pack is ready for any open-world, sandbox, or cinematic project.

• 474 modular meshes optimized for real-time performance
• 7 unique material tiers: Hay, Wood, Stone, Red-Brick, Concrete, Metal Sheet, Armored Metal
• Designed for easy build systems and modular construction workflows
• PBR 4K textures (Base, Normal, Mask) for realistic materials and clean surface detail
• Polygon count range: 8 – 8,588
• UV mapping: Yes (non-overlapping lightmap UVs)
• LOD support: Up to 3 per mesh for scalable performance
• No rigging or animations – clean modular geometry
• Highly optimized for mid-range and high-end systems
• Ideal for survival, crafting, sandbox, or base-building projects
• No demo scene included – designed for direct integration into build systems

Build, fortify, and expand with the Multi-Material Modular Building Pack, a complete toolkit for creating dynamic, game-ready structures across seven unique material tiers: Hay, Wood, Stone, Red-Brick, Concrete, Metal Sheet, and Armored Metal.

Designed for easy build systems, base-building mechanics, and modular construction games, this pack gives creators flexible, snap-ready components for crafting player-built environments. From early survival shelters made of hay and wood to high-end armored bases, every piece transitions naturally across upgrade stages, ideal for games inspired by Rust, Fortnite, and Sons of the Forest.

Each asset is authored with PBR 4K textures (4096×4096), optimized geometry, and non-overlapping UVs for consistent lighting. With 474 modular meshes, it’s engineered for fast iteration, efficient memory use, and compatibility with custom build systems or third-party frameworks.

Whether you’re building rustic settlements, fortified outposts, or industrial survival zones, this pack gives you the foundation for scalable, player-driven construction.

Monster 15 – Game Ready (Rigged, Animated, No Facial Rig)

Polygon Count: 3618 verts / 3791 tris

Rigging: 81 bones, 1 skinned mesh

Animations: 11 unique (Idle, Walk, Run, Die, Attack 01–04, Shoot, GetHit, Stunned)

Textures: 90 maps

Texture Size: up to 2048x2048 (mobile-friendly, cel-shader compatible)

Pipeline: URP supported

This package provides a fully game-ready stylized 3D monster designed for RPG, fantasy, and action games.

All assets are optimized for both low-device mobile with 2 level optimized and PC indie game, prototype projects, easy to customize, and ready for production use.

Monster 15 – Game Ready (Rigged, Animated, No Facial Rig)

Polygon Count: 3618 verts / 3791 tris

Rigging: 81 bones, 1 skinned mesh

Animations: 11 unique (Idle, Walk, Run, Die, Attack 01–04, Shoot, GetHit, Stunned)

Textures: 90 maps

Texture Size: up to 2048x2048 (mobile-friendly, cel-shader compatible)

Pipeline: URP supported

All Animation

• Monster 15 (Rigged, Animated) | NO FACIAL
• 11 Animation In-Place:

Die

Idle

Walk

Run

Attack 01

Attack 02

Attack 03

Attack 04

Shoot

GetHit

Stunned

• 11 Animation Root Motion:

Die

Idle

Walk

Run

Attack 01

Attack 02

Attack 03

Attack 04

Shoot

GetHit

Stunned

• 15 Texture Different Type.
• Cel-Shader Mobile Friendly for Monster.
• Optimized stylized textures and materials.
• Lightweight setup suitable for low device-mobile and PC, prototype project.
• Includes clean prefab organization and naming convention.
• Fully editable and extendable for your own projects.

Number of Textures: The ship consists of 5 Textures. Hull 4096x4096 Sails 2048x2048 Ropes 2048x2048, Ornaments 2048x2048, Glass 2048x2048, (Optional)Statues. (The textures can be downgraded to half or even more with minimal quality loss. Change them depending on your needs)

Texture Dimensions: All texture dimensions are powers of 2

Polygon Count: (Airship main) LOD0 155261 tris. LOD1 93287 tris. LOD2 52317 tris.

Rigging: No

Animations: There are scripts to create animations for hull, navigation wheel and sails, Also there are animated Captain and cannons.

Blendshapes: Sails have blend shapes, low wind, high wind, roll, low and high wind can be used to exaggerate the effect.

UV mapping: Yes

LOD information: Ship parts, cannons, and furniture have LOD0 LOD1 levels.

Types of Materials: Unity materials, HDRP, URP and Standard

Demo scripts : Airship controller, Airship AI Enemy, Sail Controller, use with UNITY 6 or higher.

This high-quality 3D model of a medieval fantasy airship features fully detailed interiors, a demo Airship controller system,demo enemy ship AI, animated captain, and a variety of interior assets, including , animated cannons. Performance is optimized using texture atlases for similar assets, and the model includes 3 alternative hull colors and 3 sail material options.

Smaller components, such as railing assets and furniture, are separate from the main ship model and include Level of Detail (LOD) options for improved performance while navigating around the ship. All necessary colliders are preconfigured for immediate use.

The ship’s sails are equipped with BlendShapes, offering multiple wind states: low wind, high wind, and a rolled-up version for added realism.

Download the playable build linked below to explore the ship in detail!

https://drive.google.com/file/d/1sd0pCDU6Dc5PFE_C-y8gm5BH_btx87p-/view?usp=sharing

The Demo Controller and AI are designed primarily to work with Unity 6. Please download and play the demo before purchasing, if you have any questions before/after purchasing feel free to ask. Let us know what you find lacking in features you would like to see added to the airship and wait for the update.

Online Documentation: https://docs.google.com/document/d/1t40Kmeg1DCCxl6CegWQgUmMgwOHt-63Wr_LPfHl9CAc/edit?tab=t.0

Rigged: (Yes)

Animated: Yes

Number of Animations: 17

Number of characters: 1

Vertex counts of characters: 26252

Number of Materials: 5

Number of Textures: 44

PBR textures

Texture Resolutions: (1024x1024, 2048x2048, 4096x4096)

Important/Additional Notes: The skeleton has additional bones :joint_mount, joint_mount1, joint_ear_l, joint_ear_l1, joint_ear_r, joint_ear_r1, joint_tongue, joint_tongue1, joint_tongue2, joint_eye_r, joint_eye_l, joint_medallion, joint_medallion2, joint_ring, joint_rope_r, joint_rope_r1, joint_rope_r2, joint_rope_l, joint_rope_l1, joint_rope_l2.

The render was made in the Marmoset.

HDRP

No action to improve the quality of the textures or the image as a whole.

The character is modular. Customizable materials will also add variety.

Features:

• Changing color skin,teeth,eyes,claws,tongue,cloth,ring,medallion,ropes.
• Blood Mask.
• Dirt Mask.
• Includes physics of medallion, ring, and ropes.
• Skirt simulation.
• Separate mesh parts.
• Morph target eyes.
• Low Poly

Vampire Body:

• Vertices 16387
• Faces 16678
• Tris 32119

Things:

• Vertices 9865
• Faces 9884
• Tris 19158

4 sets of textures :

• Body (4096x4096)
• Head (4096x4096)
• Things (4096x4096)
• Eye (2048x2048)

Asset contains 17 animation.

Animation in the video.

The skeleton has additional bones :joint_mount, joint_mount1, joint_ear_l, joint_ear_l1, joint_ear_r, joint_ear_r1, joint_tongue, joint_tongue1, joint_tongue2, joint_eye_r, joint_eye_l, joint_medallion, joint_medallion2, joint_ring, joint_rope_r, joint_rope_r1, joint_rope_r2, joint_rope_l, joint_rope_l1, joint_rope_l2.

For additional questions, please contact balika_2602198@mail.ru.

- Tested in Unity 6000.3.1f1

- Pipeline Compatiblity : URP and HDRP

- Model Format : FBX

- Polycount : 512 Tris (single mesh, shared across all 8 variants)

- Variants : 1 Mesh with 8 Prefabs based on Textures / Materials variants.

- UV mapping : Yes, Non-overlapping

- Textures Size : 2048x2048

- Texture Format : PNG

- Texture Maps : PBR (Albedo, Normal, MetallicSmoothness (URP), MaskMap (HDRP))

- Rigging/ Animation : No

- LODs : None

- Scale unit : 1 unit = 1 meter (real‑world scale)

- Usage : Game Props, AR/VR Applications, Mobile Applications

This Pack Bring realism and efficiency to your projects.

This package includes 1 mesh with 8 prefab variants, each featuring unique texture/material setups for both URP and HDRP pipelines, Variants include colours, types, and conditions. Designed with Low poly, clean topology and non‑overlapping UVs, the asset is lightweight yet visually detailed, perfect for Realistic environments.

I'm using the URP rendering pipeline. If you import materials into your project and they appear pink, just modify the materials accordingly.

These are 3D models of 16 ancient Asian buildings. You can use them in your games. I hope they can help you.

Main Features:

12 models.

12 prefabs.

Texture resolution: 2048*2048.

All triangles: 1901023, all vertices: 1255512.

I'm using the URP rendering pipeline. If you import materials into your project and they appear pink, just modify the materials accordingly.

Contact Me:

If you have any questions, please feel free to contact me.

Email: liuerjie20131314@163.com

⚙️ Technical Details:

• Polycount: ~5K tris 

• Texture size: 2048x2048 

• Unity version: 2020.3 or newer 

• Pipeline: Built-in / URP compatible

Voodoo Doll – Stylized 3D Prop

Add a touch of mystery and charm to your project with this high-quality stylized voodoo doll model. Ideal for horror, adventure, or stylized environments.

💀 Features:

• 1 fully textured 3D model (FBX)

• 2K PBR textures (Albedo, Normal)

• Prefab ready to drag & drop into any scene

• Compatible with Built-in and URP

• Demo scene included

• Optimized for performance

⚙️ Technical Details:

• Polycount: ~5K tris

• Texture size: 2048x2048

• Unity version: 2020.3 or newer

• Pipeline: Built-in / URP compatible

🧵 Folders included:

Documentation

Model

Materials

Textures

Prefabs

Scene (VoodooDoll_Demo.unity)

💬 Support:

For any issues or suggestions, contact us at diaazineddin99@gmail.com

Created with care by DarkDrop Studio — premium assets

Number of textures - 87 textures - 70 albedo, 17 normal

Texture dimensions - 2048px

Number of meshes/prefabs - 38 meshes, 58 prefabs

Minimum polygon count - 80 vertices

Maximum polygon count - 72,000 vertices (tree), 5,020 vertices (items)

UV mapping - No

This Stylized Hand-Painted Garden & Farm Props pack features 58 prefabs, all in a garden/farm theme & in a cozy/toon style. Each texture is 2k (but can easily be downsized for performance) and hand-painted in a consistent style. Each low poly model has been optimized for game performance.

This pack features garden decor, flowers, planters, fences and more:

• Birdhouse
• Boot
• Bucket
• Chicken Coop
• Egg Carton
• Fallen Pot
• Fence pieces (post, left post, right poste, gate open & gate closed)
• Glove
• Hay bale
• Lettuce & sapling
• Marigold
• Pansies
• Planter (basil, pumpkin, tomato)
• Rainboot
• Rake
• Row of Soil
• Shovel
• Solar Light
• Stepping Stones
• Strawberries
• Sunflower
• Tree
• Trowel
• Tulips
• Watering Can
• Wheelbarrow
• Wicker Basket
• Wood Plank

If you like the flowers featured in this pack or are looking for just those, please check out my Stylized Hand-Painted Plant & Flower Pack

* Please note, the skybox and terrain are not included.

The ARPG Bone Magic Pack is all about magic that refuses to stay dead. A pack of realistic necromantic effects, featuring bones, skulls, ghost-fog and ritual-grade dark energy. Perfect for necromancer abilities, undead spellcasting, and any gameplay that deals in decay, curses, and soul manipulation.

Built to feel physical, not just particles on screen: bones have weight, glyphs feel carved, fog rolls like spirit residue. Everything looks like it belongs to a world where death is just a resource.

Drop the VFX directly into your ability logic, no fixed sequences, no rail-based animation, no extra setup. Fully compatible with URP / HDRP / Built-in, running on a unified shader with quick controls for glow, color, distortion, scale and overall mood. Ideal for summoning, curse-based spell kits, undead bosses, ritual arenas, soul-drain beams and any gameplay built around the dark arts.

☠ Key Features ☠

Minimal setup — drag, drop, and unleash the arcane;

Single shader for all particles (easy to tweak + stylize);

Compatible across ALL Unity rendering pipelines;

No timelines — plug in and cast instantly;

Cohesive, stylized art direction optimized for visibility in gameplay;

Ready-to-use magic VFX for abilities, portals, impacts & summoning circles.

The ARPG Blood Pack is built for games that need blood that actually feels like blood. Not mist, not red smoke — realistic PBR surfaces, wet reflections, and thick volumetric shading that reads like flesh rupturing on impact.

Powered by a single shader and fully compatible with URP / HDRP / Built-in, every effect keeps its identity sharp and readable in motion. Perfect for dark magic builds, vampiric abilities, demonic summons, blood-charged projectiles, curses, aoe ruptures, and anything that shouldn’t exist under normal moral standards.

Inside you’ll find rune-circles carved like open wounds, geysers of scarlet energy, swirling corruption storms, pulsing spheres of coagulated power, ground-stains, impacts, slashes and discharge trails that feel like they were torn out of a dungeon full of bad decisions.

🩸 Key Features 🩸

• Drop it in and start spilling — no fuss;

• One shader controlling the entire set for fast art direction tweaks;

• Works on all Unity render pipelines out of the box;

• Clean organization + showcase scenes for immediate testing;

• Optimized visuals with gritty detail and cinematic brutality;

• Designed for spells, combat VFX, boss entries, rituals & corruption-based effects.

• 38 VFX Prefabs

Not just blue particles, this is frost that bites. Shards form with crystalline detail, mist blooms like frozen breath, sigils crack into the ground like fractured glass, and beams rip forward with glacial weight. Every effect feels like it was pulled from a winter altar or carved from an ancient, frostbound tomb.

Perfect for cryomancer spell kits, frost mages, void-infused magic, cursed ice bosses, frozen impacts, portals, explosions and dark elemental rituals. Runs on a unified shader for glow, tint, distortion and behavior: plug-and-play across URP / HDRP / Built-in with instant parameter control for mood and tone.

❄ Key Features ❄

• Frozen impacts, sigils, beams, mist and burst effects;

• Unified shader — tweak color/energy to pure frost or void-fused ice;

• Supports URP / HDRP / Built-In out of the box;

• Perfect for cryomancy, elemental ice builds, ritual magic & cursed frost abilities;

• Crisp silhouettes + readable FX designed for high-action gameplay.

Step into the arcane convergence with ARPG Arcane Pack, a collection of stylized spell VFX built from pure cosmic energy and high-velocity magic flow. Each effect shimmers with pulsing nebula-like motion, crackling runes, and luminous violet power, crafted to stay readable and cinematic even in the chaos of real-time combat.

Designed for URP, HDRP, and Built-in pipelines, this pack is perfect for arcane bombardments, summoning rituals, teleport gateways, mana eruptions, projectile impacts, and high-fantasy spell systems.

✨ Key Features ✨

Minimal setup — drag, drop, and unleash the arcane;

Single shader for all particles (easy to tweak + stylize);

Compatible across ALL Unity rendering pipelines;

Includes overview scene + in-context spell demonstrations;

Cohesive, stylized art direction optimized for visibility in gameplay;

Ready-to-use magic VFX for abilities, portals, impacts & summoning circles.

Built with high-quality shaders, refraction, and subtle particle detailing, each effect delivers believable motion and depth.

Every VFX in this pack is fully optimized and compatible across all Unity rendering pipelines (URP, HDRP, Built-in), ensuring smooth integration with any project setup. Effects are created with performance and scalability in mind, running effortlessly from mobile builds to high-end PC and console projects.

Expect a wide variety of splashes, streams, bursts, droplets, bubbles, and dynamic water interactions—all crafted to feel crisp, immersive, and game-ready right out of the box.

We offer compatibility for Standard Render Pipeline, Universal Render Pipeline (URP), and High Definition Render Pipeline (HDRP).

💧 Key Features 💧

• Minimal set-up to get it working on your own mesh
• 1 Shader for all particles
• Compatible with ALL rendering pipelines;
• Consistent stylized art direction;
• Drag and Drop!

Number of textures: 4

Texture dimensions: (2048x2048,4096x4096)

Polygon count :

Minimum polygon count: 1170

Maximum polygon count: 5030

Number of meshes/prefabs: 3x2

Rigging: Yes

Animation count: 16

Animation type list: 

• Idle
• Combat_Idle
• Look_Around
• Walk
• Run
• Jump
• Block
• Threat_Gestur
• Death_1
• Death_2
• Hit_1
• Hit_2
• Attack_1
• Attack_2
• Attack_3
• Attack_4

UV mapping: Yes

LOD information: No LODs

Types of materials and texture maps:

Albedo, Normal in TGA Format

Rig: Generic

Character

• Polygons: 5030
• Vertices: 5990
• Triangles: 9868

Dagger

• Polygons: 1170
• Vertices: 1268
• Triangles: 2180

Animation list:

• Idle
• Combat_Idle
• Look_Around
• Walk
• Run
• Jump
• Block
• Threat_Gestur
• Death_1
• Death_2
• Hit_1
• Hit_2
• Attack_1
• Attack_2
• Attack_3
• Attack_4

Number of textures: 4

Texture dimensions: (4096x4096)

Polygon count :

Minimum polygon count: 3665

Maximum polygon count: 4155

Number of meshes/prefabs: 3x2

Rigging: Yes

Animation count: 2x20

Animation type list: 

• Idle_1
• Idle_2
• Idle_3
• Walk
• Run
• Flee
• Jump
• Block
• Anger
• Sitting
• Talking_1
• Talking_2
• Greeting
• Death_1
• Death_2
• Hit
• Attack_1
• Attack_2
• Attack_3
• Attack_4

UV mapping: Yes

LOD information: No LODs

Types of materials and texture maps:

Albedo, Normal in TGA Format

Number of characters: 2

In addition, you can buy each of the characters separately on my store page.

Rig: Generic

---Characters---

Peasant Mevina:

• Polygons: 4155
• Vertices: 4721
• Triangles: 8117

Peasant Tob:

• Polygons: 3665
• Vertices: 4165
• Triangles: 7226

Animation list:

• Idle_1
• Idle_2
• Idle_3
• Walk
• Run
• Flee
• Jump
• Block
• Anger
• Sitting
• Talking_1
• Talking_2
• Greeting
• Death_1
• Death_2
• Hit
• Attack_1
• Attack_2
• Attack_3
• Attack_4

▶️ Geometry

1410 Unique Assets

1.550k triangles all pack

▶️ Characters

On average, each character model has around 5,6k polygons.

▶️ Scale

Real-world-size

▶️ Materials

All models use 24 materials

▶️ Textures

All models use 23 textures

▶️ Collision

Yes

▶️ Files

If you want to refine the models using a 3D editor — you can request the following files from us:

Blender, C4D, Maya, 3DSMax, FBX, USDZ, OBJ, GLTF

Ithappy Discord Community

Сonnect with digital art enthusiasts, and stay up to date on new products, tutorials and more! 💥🎮

All lists 🎮

You can look through all the packs in the category you need and choose the ones you like the most!

● PLATFORMERS

● CHARACTERS

● LOCATIONS

● ENVIRONMENT

● CITIES

● INTERIORS

● PROPS

● FREE

▶️ Key Highlights ◀️

The pack includes 300 prepared 3D characters — professionals from various fields as well as everyday city residents. It features models of different ages, body types, and skin tones. The pack contains over 1,100 unique clothing assets, a large set of themed animations, and a variety of facial expressions. Additionally, it includes more than 100 interactive props, vehicles, and 13 animal models.

▶️ Key Features ◀️

● Demo Scene includes 300 unique 3D characters: 90 professionals and 210 everyday citizens. All clothing items are separate 3D models, allowing you to replace, remove, or mix them freely. Characters cover multiple age groups and body types: Adult, Plus-size, Pumped, Senior, Teen, and Child.

Each character has an individual index number, making it easy to locate any model.

● 1100 Unique Assets. The pack includes 1100 unique clothing assets created specifically for different body types and both genders — each item is truly unique and not shared across character categories, ensuring maximum visual variety. For example, a leopard-print tank top exists only for one specific character type and is not duplicated for others. Assets are organized into categories such as hats, hairstyles, glasses, tank tops, shirts, sweaters, jackets, coats, blazers, suits, pants, skirts, shorts, shoes, gloves, jewelry, bags, backpacks, and other wardrobe elements, providing a deeply customizable and diverse appearance for every character.

● Animations. The pack includes over 150 unique thematic animations, such as walking, running, sitting, relaxing, talking, gesturing, interacting with objects, taking photos, using a phone, drinking, eating, waving, shopping, and many more everyday actions. You can also freely use animations from the Mixamo library, which offers more than 2600 additional animations to further expand and customize character behavior.

● Icons. All demo characters and assets have icons.

● Animals. The pack includes 13 animal models — several dog breeds and stylized cats, each provided with multiple color variations and a full set of animations.

● Character Controller: Press the “Play” button and control your character using WASD. The controller is set up for a third-person view. You can adjust the camera settings to set the angle that works best for you.

● Ease of Use. The pack includes two files with different Unity versions, and in each one, the scene is set up in three render pipelines. Simply download the version you need and open the scene in your preferred render pipeline. Everything is clear and easy to use.

● Optimized Models. Each model is designed with a limited number of textures, an optimized mesh, and simple shaders, ensuring smooth performance across mobile devices, VR/AR, PCs, and consoles. With these assets, your project will maintain excellent performance while delivering stunning visuals.

● Support. Free updates and technical support available in our Discord.

▶️ Demo Scene ◀️

300 unique animated characters.

● 90 professional character models:

There may be more than one model per profession, so the list contains fewer than 90 unique titles.

Actor, Architect, Artist, Basketball PL, Bicyclist, Builder, Businessman, Businesswoman, Captain, Cashier, Cleaner, Cook, Courier, Dealer, Doctor, EMT, Farmer, Firefighter, Football PL, Gardener, Garbageman, Hairdresser, Housemaid, Patient, Policeman, Prisoner, Repairman, Saver, Security, Stewardess, Swimmer, Teacher, Waiter, Waitress.

● 210 city character models:

Fashionable Characters — men and women in bright, trendy outfits: printed shirts, dresses, colorful suits, stylish jackets, hats, blazers, and accessories.

Casual City Residents — characters in everyday urban clothing: T-shirts, sweatshirts, jeans, leggings, shorts, sundresses, skirts, hoodies, and various jackets.

Beach & Vacation Characters — people in beachwear: swimsuits, swimming trunks, shorts, light shirts, hats, and summer accessories.

Festive & Themed Outfits — characters in unusual and themed clothing: costumes, unique hats, festive sets, and expressive looks.

Classically Dressed Characters — characters in more elegant and neat outfits: dresses, shirts, blazers, trousers, long coats, and trench coats.

Cold-Climate Residents — characters in warm clothing: down jackets, coats, hats, scarves, and winter boots.

Summer Outfits — characters in lightweight clothing: T-shirts, tank tops, shorts, summer dresses, and light footwear.

Unique Stylish Characters — distinctive and bold outfits: hats, unconventional color combinations, creative silhouettes, and fashion accents.

▶️ Animations ◀️

The pack includes over 150 unique thematic animations, such as walking, running, sitting, relaxing, talking, gesturing, interacting with objects, taking photos, using a phone, drinking, eating, waving, shopping, and many more everyday actions.

You can also use animations from Mixamo, which offers more than 2,600 unique animations. Add them to your project by following this guide.

▶️ 1100 Unique Clothing Assets ◀️

The pack includes 1100 Unique Clothing Assets, created specifically for different body types and both genders — each item is truly unique and not shared across character categories, ensuring maximum visual variety. For example, a leopard-print tank top exists only for one specific character type and is not duplicated for others.

Assets are organized into the following categories:

● Hair — various hairstyle options; some are compatible with headwear and are labeled accordingly.

● Facial Hair — a wide selection of beards and mustaches.

● Headwear — hats, caps, beanies, and themed accessories.

● Glasses & Masks — sunglasses, everyday glasses, and decorative mask options.

● Jewelry.

● Backpacks & Bags — a variety of models for different character styles.

● Gloves — regular, insulated, and stylized variants.

● Footwear — sneakers, boots, dress shoes, sandals, and winter footwear.

● Costumes & Outfit Sets — both everyday clothing and specialized outfits (professions).

● Outerwear — jackets, zip-hoodies, puffer jackets, coats.

● Shirts & Tops — dress shirts, polos, blouses, Hawaiian shirts, T-shirts, and tank tops.

● Blazers & Jackets — classic blazers, tuxedos, vests.

● Dresses — casual, evening, asymmetrical, and fitted dresses.

● Bottoms — pants, trousers, shorts, and skirts in various styles.

All clothing assets are optimized for mixing and matching, allowing easy customization and a highly varied appearance for any character.

▶️ 100 Props ◀️

The pack includes a wide variety of interactive props designed to enrich scenes and animations. Items are grouped into compact categories for convenient use:

Everyday Items — smartphones, tablets, coffee cups, ice cream (popsicle & soft serve), drinks with straws, newspapers, gift boxes, umbrellas, shopping bags.

Travel & Outdoor — suitcases, travel bags, backpacks, umbrellas, sun umbrellas, bouquets, picnic bags.

Sports & Recreation — balls (basketball, soccer, volleyball), beach balls, dumbbells, tennis rackets, badminton rackets.

Tools & Equipment — flashlights, walkie-talkies, screwdrivers, wrenches, kitchen tools (spatula, whisk, ladle), scissors, frying pan, spray cans, rakes.

Art & Office Supplies — notebooks, clipboards, markers, pens, pencils, paint palette, canvases/rolls, cameras, selfie stick.

Miscellaneous — signs, briefcases, serving trays, trophies, food containers, medical kit.

Если нужно — могу сократить, разделить иначе или адаптировать под стиль магазина.

▶️ Animals ◀️

The pack includes 13 animal models — several dog breeds and stylized cats, each provided with multiple color variations and a full set of animations.

Dogs

Doberman — 2 variants

Labrador — 2 color variants

Dachshund — 2 variants

Pomeranian — 2 variants

Pomeranian Puppy — 2 variants

Dog animations: Idle, Walk, Run, Sit, Lie, Lie_Sleep, Lie_Happy, AskToPlay, GivePaw, Flip, Turn, Bark

Cats

Black Cat, White Cat, Ginger Cat

Cat animations: Idle, Walk, Run, Sit, Stretch, Breathing

If you liked this package, please leave a review! Creativity to you!

Follow us, new packs coming out, updates, promotions, tutorials:

DISCORD | EMAIL | INSTAGRAM | YOUTUBE

• Graphics Style: 2D Pixel Art
• File Format: PNG
• Resolution: Mixed sizes (not fixed to 32x32, includes larger variations depending on object type)
• Sprites Included:
  Tiles for dungeon floors, walls, and platforms
  Animated elements (torches, water, retractable traps, chests, etc.)
  Decorative objects (gold piles, shields, barrels, boxes, ladders, and more)
  Environmental props for dungeon atmosphere
• Compatibility: Works with all major game engines (Unity, Unreal, Godot, etc.)
• Organization: Assets are neatly categorized into folders for quick use.
• Use Case: Ideal for roguelikes, RPGs, dungeon crawlers, survival games, quest-based adventures, and fantasy-themed projects

Enter the dark and mysterious world of dungeons with the 2D Top-Down Pixel Dungeon Pack. Designed for developers who want to bring their top-down adventures to life, this pack includes everything you need to create immersive and atmospheric dungeon levels.

Whether you’re building a roguelike, action RPG, MMO, survival, or fantasy exploration game, these assets will help you design environments that challenge and captivate players. From detailed dungeon walls and floor tiles to animated objects and decorations, the pack offers a wide range of elements to build endless variations of levels.

Inside, you’ll find:

• Tilesets for walls, floors, stairs, and unique dungeon structures.
• Animated objects like water, torches, traps, and treasure chests.
• Decorative props such as barrels, crates, ladders, gold piles, keys, and banners.
• Doors, arches, and gates to create dynamic pathways and locked areas.
• Environmental details that add atmosphere to every dungeon corner.

This pack is perfect for creating terrifying underground labyrinths, abandoned castles, or mysterious ruins. Each sprite is crafted in pixel art style, ensuring a consistent retro aesthetic while still being flexible enough to use in modern indie projects.

Whether you want players to crawl through dark corridors, stumble into hidden traps, or discover treasure-filled chambers, the 2D Top-Down Pixel Dungeon Pack gives you the tools to design unforgettable dungeon experiences.

Graphics: 2D Pixel Art
Format: PNG (various sizes)

Unlock the potential of your dungeon worlds and give your players an adventure worth remembering!